The damaged System File could cause Windows Detected a Hard Disk Problem to occur. So once the error occurs, you can choose to check system file. You can scan the drive if there are any issues. Click on Maintenance and look for Drive Status – This will show you the health of your current drive and a list of issues.

  • The event ID 809 indicates an error with Intune policy implementation on Windows 10 or Windows 11 PCs.
  • Most of the time, it may take 4 hours to repair disk errors.
  • Individual log entries you find will likely not point directly at a cause of failure.

If so, type Y and press Enter to perform a scan at the next boot of your system. You can restart right away or schedule the error fixing on next restart. If you can’t boot into Windows XP to run the utility use your original Microsoft Windows XP installation disc to open Recovery Console.

thoughts on “How to Scan & Fix Hard Drives with CHKDSK in Windows 8”

It works well except that you have to switch between the operating systems by restarting the system. In most cases, updating a driver is very simple. I don’t really recommend using separate “driver updater” utilities; instead, you can do it yourself in just a few clicks. Go to and select the photo that you want to save.

If you follow the two ways we provided above and still cannot fix the error, you should probably consult an expert or someone who has experienced testing. Also refer to more ways fix BAD hard drive HDD with HDD Regenerator to further enhance its workmanship. Of course, sometimes, a disk read error occurs because of a damaged hard drive, which is a job for a professional. Press Ctrl+Alt+Del to restart issues or such as read or write errors on hard disks like optical burners or other similar tools. If you have other spare cables, you can replace them with those, or just unplug the current cable. A “Disk Read Error Occurred” error message indicates a problem with the computer’s hard drive or problems with the process of reading the hard drive.

Will Chkdsk Fix Boot Problems?

The level arrangement is based on data, cautioning, blunder, and basics. I agree to receive email communications from Progress Software or its Partners, containing information about Progress Software’s products. I acknowledge my data will be used in accordance with Progress’ Privacy Policy and understand I may withdraw my consent at any time. Progress collects the Personal Information set out in ourPrivacy Policy andPrivacy Policy for California Residents and uses it for the purposes stated in that policy. To get all available information related to a single log, such as the Application log, utilize the following command. Assign nodes to this Monitoring Pack and save Monitoring Pack settings.

You should follow that advice and see if that solves the issue immediately. If you are lucky, the problem ends there and you won’t have to worry about it — provided it doesn’t happen again. When you boot from the Windows Installation media and choose ‘Repair your computer’, you will get an option of System Restore.

This article has listed 5 solutions to this disk read errors and there might be other approaches on account that causes are various. If you have other solutions, you are warmly invited to contact us and share your solutions with readers. Additionally, to protect system or data from damage, you should form the habit of backing up in regular. Step 3Press the key that can enter BIOS immediately where you can set the bootable disk as the first boot.

Leave a Reply

Your email address will not be published.